Baja Rack Rear Ladder for Gen 5 4Runners

COMPATIBLE WITH 2020 TRD PRO 4RUNNER FACTORY RACK

Our strong, steel 4Runner ladder made specifically for your 5th Gen 4Runner. Unique design made to provide roof access and maximize field of vision.

Easy, no-drill, permanent installation. Compatible with most roof rack brands. Mounts to rear door. Epoxy undercoat and black powder coat finish.

Before you install your new BajaRack ladder check the gap on top of the hatch it needs to be 5/16” to 3/8” inch, if the upper top of the ladder does not enter the gap on the hatch do not install, and check the gap clearance with a dealer or shop.

EXTREMELY IMPORTANT NOTE:

Please verify the upper (edge) of the back hatch measurement before purchasing or installing your ladder, the standard dimension is between 0.1” (2.5mm) and 0.2” (5mm) if this dimension is larger than 0.2” (5mm)  don’t install the ladder, Toyota in some models applies more sealant in this area that can cause the ladder to not fit.

Techincal Specs

Material and Thickness: 1 Inch (25.4 mm) carbon steel tube and 1/8 Inch (3.175 mm), 3/16 Inch (4.7 mm) steel.
Finish: Epoxy primer (rust barrier) with black powder coating
Mounting Method: The Ladder install directly on the rear door. (No drilling required).
Weight Capacity: 200Lb (90.71 kg)
Ladder weight: 17 Lb (7.71Kg)

Installation instructions

Shipping Dimensions: 48x16x16, 18lbs